         |
Irrigation Warehouse Group Pty Ltd
Current Category
Brass Hose Tails
Price:
Price:
Our pink teflon plumbers tape is manufactured by Fedseal and is definitely a far superior product to all of those very thin white tapes. "Teflon 002" is manufactured to a very high standard and so it is of uniform size and thickness over the complete roll. With a thickness of 0.1mm it is up to 3 times thicker than some cheaper white versions on the market. "Teflon 002" should be used on all Nyglass, stainless steel, brass, cast iron, aluminium, gunmetal, ductile iron, pvc and most other BSP style threads. "Teflon 002" on our Hansen range of Nyglass fittings generally only requires 4 or 5 turns of "Teflon 002" to provide a leakproof seal. Rolls of "Teflon 002" are 12mm wide x 0.1mm thick x 10m long and all of the tape can be used. Price:
Price:
Price:
1/2" or 15mm Brass Director / Hose Tail - 15mm Male BSP thread x 15mm hose tail
Brass hose tails are also known as directors and are used with flexible hose to provide a BSP threaded fittings so that the hose can be connected to a valve, a fitting or even a pump. Our brass hose tails are externally machined to a smooth finish, have nice even threads and, push into most flexible hoses quite easily. A terrific hose barb for long term use. This is the 1/2" or 15mm hose tail.
3/4" or 20mm Brass Director / Hose Tail - 20mm Male BSP thread x 20mm hose tail
Brass hose tails are also known as directors and are used with flexible hose to provide a BSP threaded fittings so that the hose can be connected to a valve, a fitting or even a pump. Our brass hose tails are externally machined to a smooth finish, have nice even threads and, push into most flexible hoses quite easily. A terrific hose barb for long term use. This is the 3/4" or 20mm hose tail.
Pink Teflon Plumbers Tape for thread sealing without leaks
1" or 25mm Brass Director / Hose Tail - 25mm Male BSP thread x 25mm hose tail
Brass hose tails are also known as directors and are used with flexible hose to provide a BSP threaded fittings so that the hose can be connected to a valve, a fitting or even a pump. Our brass hose tails are externally machined to a smooth finish, have nice even threads and, push into most flexible hoses quite easily. A terrific hose barb for long term use. This is the 1" or 25mm hose tail.
1 1/4" or 32mm Brass Director / Hose Tail - 32mm Male BSP thread x 32mm hose tail
Brass hose tails are also known as directors and are used with flexible hose to provide a BSP threaded fittings so that the hose can be connected to a valve, a fitting or even a pump. Our brass hose tails are externally machined to a smooth finish, have nice even threads and, push into most flexible hoses quite easily. A terrific hose barb for long term use. This is the 1 1/4" or 32mm hose tail.
