Current Category
Eco-Care Grey Water

	Eco-Care Grey Water Re-Cycling System including delivery in NSW, ACT, Vic and SQLD. This is a fantastic unit capable of recycling all of your laundry, bath, hand basin and shower water back into the garden and the Eco-Care is 500mm high x 450mm x 450mm.   This unit is not for use with kitchen or toilet waste.  It comes complete with the Eco-Care poly tank, fully automatic submersible pump (inside the tank), connections to standard 50mm DWV pipes, a waste water diverter valve and 20m of purple discharge hose ready for installation.   The Eco-Care system itself can be installed under the house or in any other location with access to a power point.   The Eco-Care system fully complies with the EPA and Department of Human Services guidelines and is approved.   We recommend that you install "Polydrain" slotted discharge pipe in garden beds to spread the recycled water evenly through the garden.   Polydrain must be installed beneath the surface and ideally with mulch over the top.   The Eco-Care is Watermark approved and a rebate is available for clients in QLD, Vic, SA, NSW and WA.   Click on the "Information" button to the right for a full description and to download pdf techncial sheets.		Price:	QTY:

	5-Way Manifold for Eco-Care Sullage Hose Outlets This is the pre-assembled outlet manifold system that we supply for the Eco-Care when you wish to be able to divert the grey water from the Eco-Care out to as many as 5 lines of sullage hose to Polydrain pipe.  Click on the "Information" button to the right to see a larger image and a schematic layout for the manifold.		Price:	QTY:

	20m coil of 50mm Polydrain slotted pipe Polydrain is the recommended drain coil for use with our eco-Care grey water recycling system.   It is a 50mm black drain coil with slots pre-cut so that the water can easily move along the pipe and out through the slots into the soil.   The price is for a 20m coil and includes delivery with an eco-Care system.		Price:	QTY:

	Eco-Care Grey Water Diverter Valve Kit The Eco-Care grey water diverter valve is the perfect solution to diverting grey water from the shower, bath, washing machine or hand basin (not the kitchen sink or toilet) into your garden.   The valve is easily installed and exceptionally reliable in enabling you to divert grey water to the garden through "Polydrain" drain coil pipe.   Click on the "Information" button to the right for more details.		Price:	QTY:

	Joiner - 50mm Polydrain this is the basic joiner to connect 50mm Polydrain to another piece of 50mm Polydrain.		Price:	QTY:

	Tee - 50mm Polydrain This is the standard 50mm Polydrain TEE.		Price:	QTY:

	End Cap - 50mm Polydrain To close off the end of a length of 50mm Polydrain you require an end cap.		Price:	QTY:

	Quick Connector for Polydrain to Sullage Hose This unit is used where you have multiple locations for your Polydrain and need to move the lilac sullage hose from one to another.   The cap is fitted with a nyglass reducing nipple and this is secured with a brass lock nut on each side.   You install one of these on the end of each Polydrain section and then you simply unscrew the lilac sullage hose, cap the end, move the lilac sullage hose to the next location and, attach the lilac sullage hose to the next Polydrain end.		Price:	QTY:

	1" Nut x 25mm Hose Tail You will need one of these with your Eco-Care when you use the "Quick Connector for Polydrain to Sullage Hose Kit".   These exceptionally high quality Nut & Tails are manufactured from Nylon and have a pressure rating of 1,200 kPa.   They are perfect for garden hoses, fire hoses, hot-water washdown and any other hose to thread application.   Supplied with a heavy-duty washer, these fittings will not leak.   5-year warranty!		Price:	QTY:

	25mm Lilac Sullage Hose x 20m coil This is a 20m coil of 25mm ID Lilac sullage hose that can be used to extend the Eco-Care hose length when the hose is going downhill.   Please note that if your hose from the Eco-Care is going uphill, you will need the Eco-Care HP version which has a stronger pump.		Price:	QTY:

	90mm Stormwater Valve This PVC gate valve is UV stable and fits standard 90mm stormwater pipe.   The push/pull handle moves the gate to the open and closed position for easy operation.		Price:	QTY: