          |
Irrigation Warehouse Group Pty Ltd
Current Category
Pipe > Low Density Poly
Low Density Poly Pipe is used extensively around Australia to supply water to sprinkler systems, sprays and drippers. Our range of pipe is Australian Made and is rated to 300 kpa and is designed for commercial and agricultural use. Our pipe is not the same pipe that you will find in hardware stores or hardware chains. Low Density Poly Pipe should never be connected to town water mains as often, the pressure available in town mains is far higher than 400 kpa. For town main or garden tap connection, a simple pressure regulator and filter should be installed. PRICES HERE ARE EX-BRISBANE OR EX-GLEN INNES AND ADDITIONAL FREIGHT IS REQUIRED.
Price:
Price:
13mm Garden "Lo-Pol" Poly Pipe x 50m Coil
13mm x 50m Low-Density "LO-POL" Poly Pipe is used with sprays and drippers and to provide water to pop-up sprinklers and sprays. L.D. Poly has a maximum operating pressure of 300 kPa so a pressure regulator must be used if the supply pressure exceeds 300 kPa. Can be sent by Australia Post or courier delivery. Our low-density poly pipe is a professional quality pipe manufactured to perform in demanding environments. (610mm diam x 120mm & 2.6 KG PER COIL)
13mm Garden "Lo-Pol" Poly Pipe x 100m Coil
13mm x 100m (2 x 50m coils) Low-Density "LO-POL" Poly Pipe is used with sprays and drippers and to provide water to pop-up sprinklers and sprays. L.D. Poly has a maximum operating pressure of 300 kPa so a pressure regulator must be used if the supply pressure exceeds 300 kPa. Can only be sent by road courier delivery. Our low-density poly pipe is a professional quality pipe manufactured to perform in demanding environments. (610mm diam x 120mm & 2.6 KG PER COIL)
