13mm Poly Fittings

13mm Poly Clamp

Poly ratchet clamps should be used on all low-density poly fittings to ensure that the tube stays on the barbed fitting.  This clamp is used on 13mm poly fittings for low density black poly pipe and brown or black dripline.

13mm End Plug

13mm end plugs are used to close the end of a poly line.   All fittings including plugs must be secured to the poly using a clamp.

13mm Poly Joiner

13mm Low density poly x 13mm Low density poly barbed joiner, requires 2 x poly clamps or Cobra clips to make the connection secure.

13mm Poly Elbow

13mm Poly x poly barbed elbow used for making 90 degree turns.

13mm Poly Tee

13mm poly x poly x poly barbed Tee.  

13mm x 1/2" BSP Director (Hose Tail)

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting, you will need a clamp to hold the low density poly onto the director.   Directors are also know as hose tails and this one fits 13mm low...

CAPO Rubber Grommet 13mm ID for XPANDO fittings

The CAPO rubber grommet is used with XPANDO 13mm fittings to allow for the easy and secure attachment of 13mm tube to polyethylene and PVC supply pipes for irrigation systems.   The 13mm ID CAPO suits the 16mm Antelco drill bit (code 10151845).

13mm x 3/4" Director

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting, you will need a clamp to hold the low density poly onto the director.   Directors are also know as hose tails and this one fits 13mm low...

13mm x 1" Director

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting, you will need a clamp to hold the low density poly onto the director.   Directors are also know as hose tails and this one fits 13mm low...

XPANDO 13mm inlet x 13mm Take-Off

XPANDO 13mm fittings to allow for the easy and secure attachment of 13mm tube to polyethylene and PVC supply pipes for irrigation systems.   Requires a CAP 10145735 Grommet.

13mm x 1/2" male Elbow

Poly x 1/2" male elbow used to provide water to a pop-up spray or riser outlet.

13mm x 1/2" male Tee

Poly x 1/2" male x poly tee used to provide water to a pop-up spray or a riser with a spray outlet on top.

Pink Plumbers Teflon Tape - 10m roll

Our Pink Plumbers Tape is true tradesman quality thick heavy duty teflon tape and is recommended for all poly, plastic, brass and steel BSP fittings to provide a perfectly waterproof connection.   Do not use cheap imitations!   There...

13mm x 1/2" Female Threaded Elbow

Poly x 1/2" female threaded elbows are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.

13mm x 1/2" Female Threaded Tee

Poly x 1/2" female threaded tees are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.

13mm Poly x Click-On Connector

This item connects 13mm low-density poly pipe directly to a standard Click-On tap connection.   Make sure that you use a 13mm stainless steel Cobra clip to hold the poly pipe.

13mm In-Line Tap

Our in-line taps are used in the low-density poly line to provide a manual isolation.   This is particularly usefull in greenhouses and fern hot houses.

13mm In-Line Filter

13mm In-Line filters must be installed wherever micro sprays, drippers or micro sprinklers are to be used.   Ideally, you should install a 25mm plastic disk filter at the tap but the in-line filters will be fine if you have very clean town...

Cobra Clips for 13mm Low Density Poly Pipe C15/8

Cobra Clips are full stainless steel clips used to provide a permanent and drip-proof connection for poly pipe to poly fittings.   Excellent value for money, extremely long life and ease of application are 3 of the many popular benefits of the...