Product Description
The sprinkler VYR-65 is a part-circle agricultural sprinkler, made of brass with 1" male or female thread connection and with or without diffuser. Its axis and springs are made of stainless steel, and their O-rings and washers in stainless steel , Teflon and special polycarbonate to withstand contact with the most aggressive fertilizers in the market. The wide range of brass nozzles offer a number of possible combinations among nozzles. This sprinkler is designed to work under some flow ranges between 2240 and 7840 l / h, at pressures between 3.5 and 6 and BAR with a coverage range between 16 and 24 meters in diameter. The main nozzle is 28 ° degree angle to the horizontal plane and the secondary 14 º. Their average time of rotation comes to be approximately 35 sec./rotation. For optimum uniformity coefficient, our technicians recommend the use of the sprinkler heads with a spacing between lines and 15x15 meters to 24x24 meters rectangular frames and 15x15 meters to 26x26 meters triangular frames. The most common use given is irrigation of cereals such as wheat, barley or corn, alfalfa, beets, leafy vegetables sturdy vegetables and tubers. To download the pdf spec sheet, click here. This sprinkler can be supplied with just a main nozzle and blanking cap for the secondary nozzle, 5.6mm, 6.4mm, 7.1mm, 7.9mm, 8.7mm, 9.5mm. It can also be supplied with twin nozzles as per the chart below, 5.6mm and 3.17mm, 6.4mm and 3.17mm, 6.4mm and 3.17mm, 7.1mm and 3.17mm, 7.1mm and 3.17mm, or 8.7mm and 3.17mm. See the chart below for flow rates and diameters of wetted area.